Hydr

Overview

Basic Info.

Model NO.	AHP03-1S-36
Inlet Ports	3/8′′ Fnpt
Outlet Ports	1/4′′ Fnpt
Max. Flow	1.28 L/Min
Certificate	ISO9001:2015, CE, Atex
Application	for Charging Cylinder, Pressure Test, etc
Medium	Hydraulic Fluids, Water, Solvents, Mild Chemicals
Actual Ratio	41:1
Material	316 Stainless Steel
Max. Pressure	31 MPa
Model No.	Ahp03-1s-36
Power	Pneumatic
Driven Power	Compressed Air of 3 to 8 Bar
Pump Type	Single Drive Single Acting
Transport Package	Foam Inside, Carton Box /Wooden Box Outside
Specification	316 stainless steel
Trademark	HYDR-STAR
Origin	China
HS Code	8413501090
Production Capacity	100 PCS Per Week

Product Description

Product Parameters

HYDR-STAR AHP03-1S-36 31-60 Mpa Output Portable Miniature Pneumatic Driven Liquid Co2 Booster Pump

Item	Value
Model NO.	AHP03-1S-36
Max. Pressure	31 Mpa
Max. Flow	1.28 l/min
Medium	hydraulic fluids, water,solvents, mild chemicals,liquefied gases
Application	Pressure testing, Jacking and Lifting, Valve actuator control, Hydraulic cylinder actuation, Roller tensioning, Precision lubrication and spraying, Work holding and power clamping, Liquefied gas transfer, Machine tools, Well Control Panel
Warranty	1 year

Product DescriptionAir driven liquid pumpAir driven liquid pumps operate on the principle of differential working areas. An air piston drives a smaller diameter plunger or piston to provide a pressure ratio.The pressure ratio is the method of determining maximum outlet pressure available. HYDR-STAR model numbers reflect the nominal pressure ratio of the pumps. HYDR-STAR liquid pumps will cycle automatically when compressed air is first applied to the drive. It will start cycling at its maximum speed thus producing maximum fluid flow. At this stage, the pump is acting as a transfer pump, filling the pressure system with fluid. As resistance increases in the system (creating back pressure to the pump), the pump will decrease its reciprocating action. Back pressure in the system finally balances with the incoming air drive pressure times the ratio. At this point, the pump will stall and maintain pressure without consuming any energy. If there is further demand on the system for flow, the pump will automatically start cycling again.

The series and its functions
HYDR-STAR pumps offer the right solution for every application. They are suitable for different or stepped flow rates as well as for different maximum allowable operating pressures.HYDR-STAR pumps with two or three air drive sections reach the same final pressure as a HYDR-STAR pump with one air drive section with 1/2 or 1/3 of the air drive. Double-acting pumps increase the pump capacity by around 50% in comparison to single-acting pumps and reduce the pulsation equally.

Hydr-Star Ahp03-1s-36 31-60 MPa Output Portable Miniature Pneumatic Driven Liquid CO2 Booster Pump

Product Features☆ Up to 100,000 psi (7000 bar) capability.
☆ Infinitely variable cycling speed.☆Stall feature at pre-determined pressure to hold that pressure without consuming power .☆Easily automated, with many modification and control options available.☆ Suitable for most liquids and liquefied gases.☆ Can be manufactured to meet CE, ATEX and NACE.☆Robust, reliable, compact and easy to maintain proven design.☆ Unbalanced cycling spool provides immediate response to pressure changes.☆Also available in standard, Configuration required by customer.☆No need for air-line lubrication, which saves costs and prevents contamination.

Product Application

☆ Pressure testing☆ Jacking and Lifting☆ Valve actuator control☆ Hydraulic cylinder actuation☆ Roller tensioning☆ Precision lubrication and spraying☆ Work holding and power clamping☆ Liquefied gas transfer☆ Machine tools☆ Well Control PanelOur Advantages

Easy handling

1. Initial operationThe pump is prepared for operation manually:☆ Connect supply lines (compressed air, suction and pressure lines).☆ Set air drive pressure.☆ Open compressed air supply slowly so that the high-pressure pump starts up .2. Build up pressureThe pump technology executes all the steps for pressure build-up automatically: ☆ Automatic cycling of 4/2-way valve (spool cycling valve) by means of air pulses from the pilot valve (2/2-way valve)☆ Suction of medium.☆ Optimum cycling conditions thanks to large cross-sections .3. Achieve and hold pressureThe pump controls the processes of reaching and holding pressure.☆ Pump automatically stops operating when the operating pressure is reached due to equilibrium of forces☆ Pressure is held.☆ Pressure holding phase with no energy consumption or heat generation .☆ Pump restarted automatically if operating pressure drops. Company Profile

Hydr-Star Ahp03-1s-36 31-60 MPa Output Portable Miniature Pneumatic Driven Liquid CO2 Booster Pump

Formed by the technical team with at least 15-year experience in high-pressure technology and fluid control, HYDR-STAR Fluid Control Company Limited has long been regarded as the leading manufacturer in China for pneumatic driven liquid pumps&gas boosters and high pressure(up to 100,000psi) valves. With the growing acceptance from foreign customers on its pumps and valves application experience, HYDR-STAR is accumulating the reputation among some of the most influential players abroad. Unlike the omnipresent trading companies, HYDR-STAR is typically a manufacturer with an authentic base where the office building and modern workshop cover 30,000 sq meters. The workshop is characteristic of advanced manufacturing equipment, a dust-free level assembly room, a complete range of sophisticated machines for raw materials inspection, and hydraulic & pneumatic units for various functions and performance tests. The certificates of CE, TUV, SIL, and ATEX are available. In addition, HYDR-STAR has obtained the latest ISO9001:2015 issued by SGS. The business cooperation type we support includes direct purchase, agent/ distributor authorization, OEM service, ODM service, etc. Welcome to contact us and visit our factory!Certifications

Hydr-Star Ahp03-1s-36 31-60 MPa Output Portable Miniature Pneumatic Driven Liquid CO2 Booster Pump

Equipement& Exhibitions

Hydr-Star Ahp03-1s-36 31-60 MPa Output Portable Miniature Pneumatic Driven Liquid CO2 Booster Pump

Packaging & Shipping

Foam Inside, Carton Box /Wooden Box Outside

FAQ

1. who are we?We are based in Hubei, China, start from 2013,sell to Domestic Market(15.00%),Mid East(15.00%),Western Europe(15.00%),Eastern Europe(10.00%),Southern Europe(10.00%),Northern Europe(10.00%),Oceania(5.00%),South America(5.00%),North America(5.00%),South Asia(5.00%),Southeast Asia(5.00%). There are total about 51-100 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?Air-driven liquid pumps&boosters,High pressure valve&fitting (stainless steel),Hydraulic power units,Hand pumps,Electrical pumps4. why should you buy from us not from other suppliers?HYDR-STAR owns an engineering team with more than 15 years of experience in the field of high pressure testing and fluid control technology, with extensive know-how in R&D, strong capacity of designing of new products and solutions5. what services can we provide?Accepted Delivery Terms: FOB,EXW;Accepted Payment Currency:USD,EUR,CNY;Accepted Payment Type: T/T;Language Spoken:English,Chinese

Products

Basic Info.

Product Description